William's Playground (2006) - Fischersplace.com Photo Gallery

 Fischersplace.com Photo Gallery

Photos from the collection of the Fischer Family
Home > Our Home > Projects > William's Playground (2006)

Most viewed - William's Playground (2006)
IMG_1963.JPG
Starting the major assembly601 viewsWe continued outside on Wednesday afternoon. Cathy holds up "frame two" so it can be attached to "frame one" and the base. Before this whole project started, we had to do some semi-major leveling of the area, since it was on a gradual slope down toward our pond (most of our yard is sloping in some way).
IMG_1978.JPG
Almost complete526 viewsWell, this is the part of the project we sort of forgot to take pictures since we were on a roll. At the time the next few pictures were taken, we were very close to complete. Here you can see an overview of the entire playground.
IMG_1979.JPG
Turbo Tube Slide507 viewsThe Tube Slide is the highlight of this playground. As a relatively expensive option, we were going to leave it off, hoping to add it "someday" but then decided that this, unlike several of the other parts of the playground, was something William could use NOW and we'd get more value out of it just by adding it from the start. It assembled together with something like a million bolts, nuts, and washers. Thank goodness for air ratchets... In this picture, we hadn't yet finished the bottom of the slide so it's just resting on boards.
IMG_1968.JPG
Starting the upper deck472 viewsWork proceeds to the upper deck. The timbers which support it are in place, and it's just about ready for the decking.
IMG_1970.JPG
Upper deck455 viewsA view of the upper deck.
IMG_1966.JPG
William checks out the situation453 viewsIn the foreground, William poses with great anticipation of his new playground. In the background, you can see the status at this point-- most of the lower deck is now complete, except for the "barrier boards" which make up the railings.
IMG_1984.JPG
More finish work434 viewsCathy works on the grade at the bottom of the Turbo Slide. One of the remaining tasks is to bring in a lot of mulch for safety to go under most of the area, and then reseed the rest of the area which was disturbed in all of the leveling efforts.
IMG_1983.JPG
View from "the penthouse"410 viewsHere's the bird's eye view from the top deck. To the left of the camera is the entrance for the turbo slide, and behind the camera is the rock wall.
IMG_1964.JPG
Adding the lower deck406 viewsAt this point, the three major frames were all installed, and Tim works on adding the decking for the lower deck. The special green brackets are in use here -- on the right side just under the lower deck you can see two in use (the others are still waiting to be used).
IMG_1971.JPG
Swing Beam380 viewsOn Thursday, we continued on by working on the swing beam. In the garage, we assembled the "A-frame" for the end support, as well as drilled all the holes through the timber and attached the swing hangers. Here, at the playground site, Cathy checks out the frame right as we get ready to attach it to the beam.
IMG_1972.JPG
Attachment difficulties378 viewsTim has a minor difficulty getting the bolts lined up with the T-nuts on top the swing beam. William checked things out, offered his advice, and we were back on track.
IMG_1986.JPG
Cargo Net372 viewsAt the end of the swing beam is a cantilevered section that we were originally going to leave out because we didn't think we had the space. We ended up having space and left it in. Due to the proximity of the tree, we couldn't put in a disc or tire swing like the plans called for. At first we were going to just leave it 'blank' and reserve it for a future 2-person glider swing once more kids come along. But instead, we decided to make our own "cargo net" climber and attach it there in the meantime.

Aug 2011 update: This "temporary" cargo net became somewhat permanent. I had intended this to last 2 or 3 years and then put in the double-glider as mentioned above. But the kids really like this cargo net. Today it officially wore out, and rather than putting in a glider, I actually rebuilt it with new rope. It's hard to say if we'll ever get the glider at this point :)
22 files on 2 page(s) 1