Most viewed - Fischersplace.com Photo Gallery

 Fischersplace.com Photo Gallery

Photos from the collection of the Fischer Family
Home > Our Home

Most viewed - Our Home
shed8.jpg
Shed Rear Framing1400 viewsHere's a view from the rear of the shed. The trusses made roof construction simple -- just place them and nail them up (bracing them temporarily with some scrap wood). At this stage the gables still need to be framed out a bit wider so there will be a slight overhang on the gable ends.
shed10.jpg
Siding Started1370 viewsThe next two days (Sunday and Monday) we were able to get some of the siding hung. The siding we're using is some nice quality 4x8 plywood siding which looks like 8" boards hung vertically. One nice thing about this type of siding is that it serves as both the sheathing and the siding, so it means less work. This picture shows the back of the shed fully sided, and the two sides partially sided.
shed12.jpg
Front Siding1295 viewsOops, what happened to the window and half the door? This picture was taken as we worked on the front siding-- the openings will be cut out of the siding once it's hung. One other note is that this siding comes pre-primed the brown color you see. We will be painting the shed a light brown with dark brown trim to match our house.
shed5.jpg
Lumber Stash1210 viewsAnother photo of the "lumber stash". You can see the large pile of studs, pile of roof trusses and header boards, and the big pile of roof sheathing and siding.
shed17.jpg
Ramp Foundation1209 viewsThe next task was for Tim to set out and complete the ramp for the shed. The first step was to create a level foundation for the far end of the ramp. For this, we used patio blocks, placed over a limestone base and placed and leveled so the end of the ramp would rest on them and have a solid surface.
shed9.jpg
Cleanup1182 viewsThe intensity of the rain increased quickly, so I snapped one final picture of Cathy bringing in the last of the tools and supplies. Now that framing is essentially complete (other than the gable framing mentioned above) the next task is to hang the plywood siding and roof sheathing.
shed11.jpg
Back finished1171 viewsHere's a view from the front, which has yet to be sided. Having the back wall finished definitely makes the shed start to look more complete. With just the two of us working, it was a bit tricky at first to position each panel and get it hung in the proper place, be we got better at it as we went along.
shed26.jpg
Inside the Shed1162 viewsOne last view of the shed, this time looking to the right of the tractor. This shed freed up some much-needed storage space in the garage, and we are able to easily get to all the tools and equipment now.
xmaslivrm.jpg
Living Room at Christmas1157 viewsHere is a view of our living room taken Christmas 2002. We really enjoy the fact that our home features two brick fireplaces (our previous home didn't have any). The large windows overlook the back yard and pond. We purchased new furniture for this room and completely painted and redecorated it.
shed16.jpg
Window Trimmed1149 viewsTim shows off the completed window trim. We had to replace a window in our old home as part of the sale conditions. We salvaged part of it, and this will become our shed's window. The door will receive similar treatment, but we're holding off to finish it until we receive the door and can verify proper dimensions. After this picture was taken, we did a lot more work without pictures. The roof was finished and shingled, the window Tim is standing in received its glass, and the soffits were completed.
shed23.jpg
Finished Product1083 viewsThe final step was to paint all of the trim dark brown, again to match the trim on our home. Here, you see a view of the finished shed!
IMG_1391.JPG
Garage Door1041 viewsHere's some detail on the garage door. As noted above, it's made of coro cut to size, and "prerolled" so that it wants to roll up with the door tracks. The tracks were made out of 2x4 stock, making an L-shape using a half-lap joint, then freehand-routing a groove in them for the door to slide in. Four stabilizer bars of wood, bolted to the coro door, add lateral strength, similar to the struts on a real garage door. There's an extra 2x4 on top in this pic that shouldn't be there thanks to William!
160 files on 14 page(s) 2